No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Robosource is excited to offer our high-quality and affordable products to the FTC community! Robot cases, polycarbonate, field risers, storage solutions, and much more are all available. We're also working on more products for FTC teams and always welcome any ideas and requests. Reach out and let us know how we can make your life easier!
FTC Related Products There are 69 products.
Subcategories
-
Robot Cases
Durable and safe solutions, perfectly sized for transporting your FTC robots, whether you're driving to a local competition or flying to Champs
-
Field Risers
Elevate your field by 24" and gain almost 300 cubic feet of valuable storage space while creating a competition-like field setup to practice on. Install folding workbenches on the sides, shelves underneath, cabinets for Robosource's storage trays, store robot cases, and so much more.
-
Storage & Organization
Robosource's innovative storage solution is great for storing parts from GoBilda, REV, Andymark, and any other FTC robot parts. Easily fit 18" long parts in customizable storage trays, cabinets, workbenches, and much more. For classrooms, robotics clubs, and competitive teams.
-
Plastic Sheets
Shatter-resistant polycarbonate, ABS, and Delrin plastic sheets for FTC and FRC Teams! Thicknesses from 1/32" to 1/2" and any size from 12x12 to full-size 48x96 inch sheets.
-
Robot Case Assembly Tool Kit
This kit includes the tools you will need to assemble your Robosource Robot Case. In addition to these tools, you will also need the following standard tools: Drill with 3/16" drill bit Measuring Tape Safety Glasses Spray adhesive (or similar) for foam lining This kit includes: Hand Riveter 15ft Ratchet Strap
$18.00In Stock -
Pick and Pluck Foam, 3 Sheets for Half...
Protect your VEX robot while packed inside a robot case by perfectly filling the space around it with this customizable pick-n-pluck foam. The 5/8" grid pattern can easily be pulled apart by hand to create exactly the cutouts and shapes you need. Each sheet of foam is the exact inside size of our V5RC/FTC Robot Case (53-11) and 3" thick. This set of 3...
$39.99In Stock -
Customizable Competition Case, Pick &...
This customizable case can be set up to hold VEX V5Ⓡ or FIRST Robotics electronics, tools, parts, or anything else when travelling to competitions! Designed to fit as a personal item or carry-on with most airlines Dividers (2 long and 2 short) can be cut to length and slotted together however you want Pick & Pluck foam can be customized to...
$59.99In Stock -
D-Rings, 10 pack
Keep your robot safe inside of a robot case by installing D-ring attachment points and then fastening your robot to them, for example with zip ties. Features: Includes 10 D-rings and installation hardware Can be installed anywhere inside the case Requires drilling holes through the case Installation Instructions: At the desired location for...
$7.99In Stock -
TSA Combination Lock, 2 Pack
TSA locks can be used when checking your robot case in on a flight, as security personnel can open them for inspection with an internal key. Robosource's latest version cases feature latches with built-in padlock brackets. Features: Includes 2 TSA travel padlocks with 4 digit combinations Fits Robosource Robot Cases
$14.99In Stock -
Tools Lid Organizer for Robot Case
Add a lid organizer to your robot case to keep your pits neat & tidy at competition! Elastic slots for screwdrivers, wrenches, pens, pliers, etc. 3 mesh pouches with zipper allow you to see what's inside Assembled robot cases shipped Spring/Summer 2023 or later come with mounting tabs installed. Earlier cases require you to install mounting tabs...
$16.00In Stock -
Batteries & Joysticks Lid Organizer for...
Add a lid organizer to your robot case to keep your pits neat & tidy at competition! Holds 6 VEX V5 batteries or 5 batteries with a power strip and chargers Spots for 2 joysticks Zipper pouch for small tools, parts, or cables Organizer can be quickly installed or removed from the lid with 4 locking tabs Assembled robot cases shipped...
$16.00In Stock -
Cart & Storage for Portable Field Riser
Easily store and move all components of your Portable VRC/FTC Field Riser with this mobile solution and simply roll everything away after your event! Recently improved design now features carpeted deck and smooth-rolling TPR casters. All 9 riser decks fit perfectly on the panel cart. Legs and hardware go into two heavy-duty, stackable totes with casters...
$395.00In Stock -
Folding Desk for Field Risers
Whether you want a place to code right next to the field or just need more table space, adding folding desks to your field risers is the solution. Plus, avoid clutter as desks must be cleaned up to be folded down at the end of the day! Grey patterned surface is durable, sleek-looking, and hides dirt Solid plywood construction is stronger than...
$95.00In Stock -
Shelf for Field Risers
Expand your storage and organization capability by adding shelves underneath your field risers. Each shelf can be installed at 3 different heights and multiple shelves can be installed under the same section Strong & Durable: Welded & powder-coated steel frame with ¾” solid plywood that is stronger than typical particle board shelves...
$85.00In Stock -
40" Wide Storage Cabinet, 28" Tall
Select door options on the right → This simple, large cabinet is a cost-effective option to store anything bulky, such as 4 VEX CTE Workcells, FIRST Robotics supplies, VEX IQ robots, and whatever else you need to tuck away! Add lockable doors to secure and hide the contents. Cabinets can also be arranged and stacked however you want to build a custom...
$175.00Out of Stock -
Desk with 2 Trays Cabinets
Select trays & doors options on the right → This desk includes 2 large cabinets to stow Roboource’s storage trays and space for a chair in the middle. You'll be surprised how many parts and tools you can organize and store right underneath the work surfaces you need anyways! Capacity for 16 storage trays or 14 trays with lids. Newly redesigned...
$295.00Out of Stock -
Tray with 30 Hardware Cups, 2.25" Deep
Store screws, nuts, spacers, and other small hardware in convenient cups arranged in a Robosource storage tray. Don’t need to fill a whole tray with hardware? Individual cups are also available and you can use dividers to make a custom arrangement with space for other parts. Flexible & convenient: Grab only the hardware cups you need or rearrange...
$22.00In Stock -
Lid for Storage Tray, Clear
These multi-purpose lids do much more than just keeping parts in and dust out! Includes measurement features for screw lengths, shaft lengths, V5 metal hole counting, and a protractor for VEX IQ angle beams. A series of compartments on the lid also make sorting parts a breeze. Lid snaps securely onto 2.25" deep storage trays and 5.5" deep storage trays...
$8.00In Stock -
Latch for Stacking Storage Tray, 2 Latches
Heading to competition? Just grab the parts trays you need, stack them up, and go! These spring-loaded latches allow you to stack and securely lock together 2.25" deep storage trays and 5.5" deep storage trays with a click. Latch set simply slides into both ends of the storage trays Just stack bins and they’re already securely locked. Stack up...
$4.00In Stock -
Short Locking Divider for 2.25" Deep Tray,...
These dividers lock into Robosource’s storage trays so they always stay where you put them and parts don’t migrate underneath. Use short and long dividers to lay out each tray however you want. Dividers can even be easily cut to length for more customizability. Locking tabs secure dividers into the tray. To remove, push in on the locking tabs from...
$8.00In Stock -
Long Locking Divider for 2.25" Deep Tray,...
These dividers lock into Robosource’s storage trays so they always stay where you put them and parts don’t migrate underneath. Use short and long dividers to lay out each tray however you want. Dividers can even be easily cut to length for more customizability. Locking tabs secure dividers into the tray. To remove, push in on the locking tabs from...
$8.00In Stock -
Short Locking Divider for 5.5" Deep Tray,...
These dividers lock into Robosource’s 5.5" deep storage trays so they always stay where you put them and parts don’t migrate underneath. Use short and long dividers to lay out each tray however you want. Dividers can even be easily cut to length for more customizability. Locking tabs secure dividers into the tray. To remove, push in on the locking...
$16.00In Stock
