Robot Case Kit with Foam Lining

	Designed for VEX Robots, Fits as Checked Luggage Sized to perfectly fit any VEX Robot with inside dimensions of 19.25” cubed. Outer size of 20” cubed fits most airlines’ checked luggage size limit, meaning you can take your robot to far away events without paying extra.
	High Strength Protection, Lighter than Pelican Cases ABS Plywood Laminate sides, Aluminum Extrusions, and quality hardware keep contents safe through rough handling, all while being lighter than the comparable Pelican 0350 Case.
	Easy Assembly with Simple Tools Fully pre-cut panels slide right into slotted aluminum extrusions and corner braces hold everything together. Watch the Assembly Video or follow the step-by-step photo instructions. All you need is a drill and inexpensive hand riveter.
	Comfortable Handles, or add Caster Wheels Move your robot case comfortably with padded rubber handles. For even easier transport, add smooth gliding casters under your case.
	Secure Padlockable Latches, Tongue-and-Groove Joints Heavy duty padlockable latches hold the case lid closed firmly, tongue-and-groove extrusions around the entire edge keep it secure while blocking dirt and water spray. For added peace-of-mind, latches can be zip-tied shut and/or secure with a padlock (padlock bracket is not shown in the photo).
	Quick-Change Removable Casters Available Optional removable casters can easily slide on and off of the case when checking in for a flight or loading the case for transport. Also allows multiple cases to be neatly stacked.
	Foam Padded Interior All Robot Case Kits include foam padding for all 6 sides.

Required Tools

The following basic tools are used to assemble the robot case:

• Drill with 3/16” bit
• Riveter, such as an inexpensive manual tool (available from Robosource.net)
• Strap, such as a ratcheting strap (available from Robosource.net)
• Spray adhesive (or similar) for installing foam lining

When adding casters, a Philips screwdriver and 3/8” (or adjustable) wrench are also used. 

Fixed vs. Quick Change Removable Casters

Fixed casters are perfect for most cases. However, if you are planning to check your case on a flight you may want to consider removable casters for two reasons. First, if your airline is very strict with measurements, the case with casters attached is slightly larger than the standard 62” limit (although we’ve never run into any issues). Second, if your case has casters on it, baggage handlers will tip it on its side so that is doesn’t roll around on conveyors and in the aircraft, so be sure to keep this in mind when packing your robot.

Weight & Dimensions

• Standard Robot Case: ~26 lbs
• Fixed Casters: add 1.6 lbs
• Removable Casters: add 3 lbs
• Outside Dimensions: 20" x 20" x 20.2"
• Inside Dimensions: 18.375" x 18.375" x 18.5"

Proposition 65, the Safe Drinking Water and Toxic Enforcement Act of 1986, was enacted as a ballot initiative in November 1986. Proposition 65 is a “right-to-know law” and the presence of a warning does not determine whether a product is safe or unsafe nor does it mean a product is in violation of any product-safety standards or requirements. Upon extensive consultation with our suppliers and manufacturers, we do not believe that our products will cause significant harm when used as intended. We are providing the following warning for this product to comply with California law and out of an abundance of caution to mitigate the risk of unnecessary litigation.

⚠ WARNING: This product can expose you to chemicals including carbon black, styrene, vinyl chlorides, phthalates, titanium dioxide, lead, DEHP, formaldehyde, hexavalent chromium six, or other compounds, which is known to the State of California to cause cancer or reproductive harm. For more information, go to www.P65Warnings.ca.gov.